The Skye range from So Easy Blinds is a made-to-measure blackout roller blind designed specifically for Velux roof windows, available in 8 finishes from £29.96. What distinguishes it from most standard roller ranges is the combination of a roof-specific fitting and a palette broad enough to work across quite different interiors - from the deep Raven Black to the cooler Grace Ivory and Ultra White.

Who it suits

Roof windows present a harder light-control problem than vertical windows. A standard roller blind won't do: the blind needs to stay taut along its length as it travels down a sloped or near-horizontal surface, which requires side channels or spring-tensioned guides to stop the fabric sagging. The Skye range is designed for Velux frames specifically, which means the bracket system accounts for that slope.

Bedrooms with Velux windows are the obvious fit. The retailer describes this fabric as blackout, and for a roof window that claim matters more than it does for a wall window - early morning light through a south-east-facing roof glazing will wake a light sleeper reliably in British summer, when sunrise can come before 5am. If darkness matters, a properly fitted blackout roof blind is the practical answer.

The range is less relevant for conservatories, which call for pleated or honeycomb blinds designed to cover angled panes rather than Velux-style opening roof windows. If your concern is heat rather than light - a conservatory overheating in June - look at cellular roof options instead.

The colours

8 colours available

The eight finishes divide roughly into two camps. Four sit in the neutral-to-warm register: Karo Natural, Henna Brown, Grace Ivory, and Ultra White. The other four are statements: Raven Black, Aruba Blue, Lava Red, and Flint Grey. That breadth is genuinely unusual for a roof blind range, where most retailers offer three or four shades and stop.

The warmer neutrals - Karo Natural and Grace Ivory in particular - will sit unnoticed against a plastered or timber-lined loft ceiling; the stronger tones, especially Raven Black and Lava Red, are deliberate choices that bring the blind into the room's scheme rather than hiding it. Flint Grey threads the middle: neutral enough to be low-key, cool enough for a contemporary finish.

All eight colours are listed at the same from-price, with no premium options across the range.

Price by your dimensions

Made to measure from £29.96. Check So Easy Blinds for the price at your exact window size.

With a from-price around £30 for a made-to-measure fit, this sits at the accessible end of the Velux blind market. Roof blinds tend to carry a higher base price than equivalent vertical blinds because the fitting system is more involved, so that entry point is reasonable for a size-matched blackout option. As with any made-to-measure range, pricing steps up with the dimensions you enter; the wider and longer the window, the further from the from-price you'll land.

How it compares

For a standard Velux roof window where the primary need is blackout - a bedroom, a loft conversion, a home office under a pitched roof - the Skye range does the job it claims to do. The fabric is roller-style blackout polyester, which is a well-understood and practical material for this application.

The main alternative consideration is a Velux-branded blind, which the window manufacturer sells directly for their own frames. Third-party options like the Skye range tend to offer a lower from-price than manufacturer own-brand fittings, though the trade-off is that you're relying on the third-party bracket system rather than Velux's own hardware. Both approaches are common in the UK market.

If thermal performance rather than blackout is your priority - reducing summer heat gain through a south-facing roof light - a pleated or honeycomb fabric would serve better than a blackout roller. The Skye range focuses on light control; it is not marketed as a thermal product.

Fitting and operation

Roof blinds for Velux windows are fitted to the window frame rather than to the wall or ceiling recess. Fitting requires identifying your Velux window's model code (usually printed on a label inside the frame or on the glass itself) to confirm the correct bracket size. So Easy Blinds lists this range under Velux-compatible fittings; confirming your window code before ordering is the step most worth taking carefully, as a mismatch means the side channels won't seat correctly.

Side channels are what keep the blind functional at any angle - they hold the fabric taut whether the window is closed, partly open, or fully open. Without them, the blind would sag on the slope. Most Velux roof blinds, including this range, use this channel-and-runner system as standard.